Tel: +44(0) 1202 48 33 33
Contact us

REIDsteel Worldwide
<em>REIDsteel</em> Worldwide Image
In almost every country in the world, people working in a REIDsteel Factory Buildings are adding value and creating wealth. REID steel have been making large industrial buildings since the 1920s and there are constantly projects on the drawing board.

Factory & Industrial Building Dimensions

Height

dim heightThe maximum height of a road truck is 4.5m, so there is usually no point in higher doors (except waste transfer buildings, aggregate stores and the like which need to cater for tipping trucks up to 11m high - and of course Aircraft Hangars). Fork lift truck masts may be higher, dictating a 6m eaves height. 5.6m is the minimum height in which 2 storeys of office can reasonably be built.

If your operation needs less height, say manual assembly, restrict the height to 3m, or you will have bigger heating or cooling bills; use 2 floors or more floors to allow truck entry/exit.

If you need cranes, tell us the hook height. Tell us of any specific internal height requirements, so we can make sure our steel is out of your way.

Please do not forget the resale value of your building if you should relocate and wish to sell it: 5.6m to eaves may be the optimum height.

Length

dim lengthAny length is possible, up to 1km or so. Unless there is a specific requirement, let us optimise the frame spacing for the required length.

Width

We can do any clear span up to, reasonably, about 200m! The most economic spans, for the building costs in isolation, are about 15 to 20m. At 30m the cost is creeping up, and it continues to rise as the span increases.

A row of props at the centre, or 2, or 3 rows may save structural cost. But please think of your operation first. The savings may seem worthwhile as a proportion of the steel, but will vanish if you ever drive a truck into a column, or jeopardise the planning of a production line because of an internal column. No one has ever hit a column that wasn't there. No one has ever cursed because the span of a building is too big. Let REIDsteel advise you on possible spans and the impact on costs.

fra
Large clear span (no props)
factory
Factory with 2 rows of props

Suspended Floors

factoryEconomy is usually around 5.8m x 5.8m column spans. But all other spans are feasible. The price starts to rise above 7m spans in either direction.

Shipping

Please remember a 20' container holds steel 5.8m long, and a 40' container 11.9m long. Every time you ask for 6m bays, 6m to eaves, 20' length, you are putting your cost up if it is to go by container. Similarly a 23m span overall can divide into 2 rafters that will fit a 40' container. 24m span wont fit and you will pay for extra freight and extra splices.

Quick Contact
Name:
Company:
Tel:
E-mail:
Enquiry:
Certificates & Awards
Queens Award for Enterprise International Trade 2006 2008 2009
Register of Qualified Steelwork Contractors Category A1
The Steel Construction Institute
British Constructional Steelwork Association
British Airport Services and Equipment Association
British Safety Council